TALK=T;RUN(1,1)
  AUTOPLOT USE
  file
  phi 5

  da 1
  p1
  screen
  msg pressure profile
  pl 1
  msg press  to continue
  pause
  cl
  da 1
  1w
  screen
  msg gas velocity
  pl 1
  msg press  to continue
  pause
  cl
  da 1
  liq
  screen
  msg liquid volume fraction
  pl 1
  msg press  to continue
  pause
  cl
  da 1
  h2
  screen
  msg liquid enthalpy
  pl 1
  msg press e to END
  enduse
  DISPLAY
  This run performs the same analysis as the previous one but
  considers phase 1 as the light phase and phase 2 as the
  heavy one. The reader may confirm that this run and the
  previous one produced the same answers.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(1D-Z PIPE BOILING  PH1-GAS,PH2-LIQ: W352)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =1.
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 5
 ZWLAST =1.
 ZFRAC(1)=0.2 ;ZFRAC(2)=0.4
 ZFRAC(3)=0.6 ;ZFRAC(4)=0.8
 ZFRAC(5)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(7)=1W
 NAME(8)=2W ;NAME(9)=GAS
 NAME(10)=LIQ ;NAME(14)=H1
 NAME(15)=H2 ;NAME(150)=MDOT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(1W,Y,Y,N,N,N,Y)
 SOLUTN(2W,Y,Y,N,N,N,Y)
 SOLUTN(GAS,Y,Y,N,N,N,Y)
 SOLUTN(LIQ,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(H2,Y,Y,N,N,N,Y)
 SOLUTN(MDOT,Y,N,N,N,N,Y)
 INTMDT = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(1W,Y,Y,N,Y,Y,Y)
 TERMS(2W,Y,Y,N,Y,N,Y)
 TERMS(GAS,Y,Y,N,Y,Y,Y)
 TERMS(LIQ,Y,Y,N,Y,N,Y)
 TERMS(H1,N,Y,N,Y,Y,Y)
 TERMS(H2,N,Y,N,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =1000. ;TMP2 =0. ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 ENUL =1.0E-05 ;ENUT =0.
 PHINT(1W)=-2.022E+04 ;PHINT(2W)=-2.022E+04
 PHINT(GAS)=-2.022E+04 ;PHINT(LIQ)=-2.022E+04
 PHINT(H1)=2.5E+06 ;PHINT(H2)=4.0E+05
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS =-2500.
 RLOLIM =1.0E-02 ;CMDOT = HEATBL
 CINT(P1)=1. ;CINT(1W)=1.
 CINT(2W)=1. ;CINT(GAS)=1.
 CINT(LIQ)=1. ;CINT(H1)=1.0E-02
 CINT(H2)=1.
 PHINT(P1)=-2.022E+04 ;PHINT(1W)=-2.022E+04
 PHINT(2W)=-2.022E+04 ;PHINT(GAS)=-2.022E+04
 PHINT(LIQ)=-2.022E+04 ;PHINT(H1)=2.5E+06
 PHINT(H2)=4.0E+05
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(1W)=1.0E-02
 FIINIT(2W)=1.0E-02 ;FIINIT(GAS)=1.0E-02
 FIINIT(LIQ)=0.99 ;FIINIT(H1)=2.5E+06
 FIINIT(H2)=4.0E+05 ;FIINIT(MDOT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(BOTTOM ,LOW , 1, 1, 1, 1, 1, 1, 1, 1)
 COVAL(BOTTOM ,1W ,0. ,0. )
 COVAL(BOTTOM ,2W ,0. ,1.0E-02 )
 COVAL(BOTTOM ,GAS , FIXFLU ,0. )
 COVAL(BOTTOM ,LIQ , FIXFLU ,10. )
 COVAL(BOTTOM ,H1 ,0. ,0. )
 COVAL(BOTTOM ,H2 ,0. ,4.0E+05 )
 
 PATCH(OUTLET ,CELL , 1, 1, 1, 1, 5, 5, 1, 1)
 COVAL(OUTLET ,1W ,0. ,0. )
 COVAL(OUTLET ,2W ,0. ,0. )
 COVAL(OUTLET ,GAS ,1. ,0. )
 COVAL(OUTLET ,LIQ ,1000. ,0. )
 COVAL(OUTLET ,H1 ,0. , SAME )
 COVAL(OUTLET ,H2 ,0. , SAME )
 
 PATCH(GRAVITY ,PHASEM, 1, 1, 1, 1, 1, 5, 1, 1)
 COVAL(GRAVITY ,1W , FIXFLU ,-9.81 )
 COVAL(GRAVITY ,2W , FIXFLU ,-9.81 )
 
 PATCH(HEATER ,PHASEM, 1, 1, 1, 1, 2, 5, 1, 1)
 COVAL(HEATER ,H2 , FIXFLU ,1.0E+05 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(1W)=10
 LITER(2W)=10 ;LITER(GAS)=1
 LITER(LIQ)=1 ;LITER(H1)=20
 LITER(H2)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(1W)=1.0E-03
 ENDIT(2W)=1.0E-03 ;ENDIT(GAS)=1.0E-03
 ENDIT(LIQ)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(H2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(1W,FALSDT,0.05)
 RELAX(2W,FALSDT,0.05)
 RELAX(GAS,LINRLX,0.5)
 RELAX(LIQ,LINRLX,0.5)
 RELAX(H1,FALSDT,1.)
 RELAX(H2,FALSDT,1.)
 RELAX(MDOT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(1W)=1.0E+06 ;VARMIN(1W)=-1.0E+06
 VARMAX(2W)=1.0E+06 ;VARMIN(2W)=-1.0E+06
 VARMAX(GAS)=1. ;VARMIN(GAS)=1.0E-06
 VARMAX(LIQ)=1. ;VARMIN(LIQ)=1.0E-06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
 VARMAX(MDOT)=1.0E+10 ;VARMIN(MDOT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(1W,Y,N,Y,Y,Y,Y)
 OUTPUT(2W,Y,N,Y,Y,Y,Y)
 OUTPUT(GAS,Y,N,Y,Y,Y,Y)
 OUTPUT(LIQ,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(H2,Y,N,Y,Y,Y,Y)
 OUTPUT(MDOT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 2
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 2
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 1 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(IZ1TONZ ,PROFIL, 1, 1, 1, 1, 1, 5, 1, 1)
 PLOT(IZ1TONZ ,1W ,0. ,2. )
 PLOT(IZ1TONZ ,2W ,0. ,2. )
 PLOT(IZ1TONZ ,LIQ ,0. ,1. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP