TALK=T;RUN(1,1)
PHOTON USE
p
msg ******************************************************
msg * Note: *
msg * ======== *
msg * Inspect the result file of d_priv1 to see the *
msg * numerical data. *
msg * The contours illustrate the solution. *
msg ******************************************************
msg Press Enter to continue
pause;cl
gr ou z 1
con c1 z 1 fil;0.01
msg C1 CONTOURS
msg Press Enter to continue
pause
con off;red
con plnt z 1 fil;0.01
msg PLANT CONTOURS
MSG Press E to end
ENDUSE
DISPLAY
This run shows the PLANT equivalents of standard PHOENICS
settings to introduce the sources of linearized form.
One-dimensional convection-diffusion problem can also be tested
against exact solution.
==============================================
Governing equation:
d(RHO*U*C)/dX = d(GAMMA*dC/dX) -SIGMA*C + SOURCE
Boundary conditions:
X = 0 , C = Cfix
X -> -oo , dC/dX = 0
X -> +oo , dC/dX = 0
=============================================
ENDDIS
PLANTBEGIN
PATCH(INLET,WEST,1,1,1,NY,1,NZ,1,LSTEP)
COVAL(INLET,C1,1.*1.,SAME)
VAL=PLNT
COVAL(INLET,PLNT,1.*1.,GRND)
PATCH(ABSORB,VOLUME,1,NX,1,NY,1,NZ,1,LSTEP)
COVAL(ABSORB,C1,RG(1),0.0)
CO=RG(1)
COVAL(ABSORB,PLNT,GRND,0.0)
PATCH(SORCE,VOLUME,1,NX,1,NY,1,NZ,1,LSTEP)
COVAL(SORCE,C1,FIXFLU,RG(2))
VAL=RG(2)
COVAL(SORCE,PLNT,FIXFLU,GRND)
PATCH(SPIL,CELL,(NX-1)/2+1,(NX-1)/2+1,1,NY,1,NZ,1,LSTEP)
COVAL(SPIL,C1,FIXVAL,RG(3))
VAL=RG(3)
COVAL(SPIL,PLNT,FIXVAL,GRND)
PLANTEND
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(1D uniform flow dispersion:121 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 121
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 11
XULAST =11.
XFRAC(1)=0.090909 ;XFRAC(2)=0.181818
XFRAC(3)=0.272727 ;XFRAC(4)=0.363636
XFRAC(5)=0.454545 ;XFRAC(6)=0.545455
XFRAC(7)=0.636364 ;XFRAC(8)=0.727273
XFRAC(9)=0.818182 ;XFRAC(10)=0.909091
XFRAC(11)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 2
YVLAST =2.
YFRAC(1)=0.5 ;YFRAC(2)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(3)=U1 ;NAME(5)=V1
NAME(16)=C1 ;NAME(150)=PLNT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(U1,Y,N,N,N,N,Y)
SOLUTN(V1,Y,N,N,N,N,Y)
SOLUTN(C1,Y,Y,N,N,N,Y)
SOLUTN(PLNT,Y,Y,N,N,N,Y)
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(C1,N,Y,Y,Y,Y,N)
TERMS(PLNT,N,Y,Y,Y,Y,N)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1. ;ENUT =0.
PRNDTL(C1)=1. ;PRNDTL(PLNT)=1.
PRT(C1)=1. ;PRT(PLNT)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(U1)=1. ;FIINIT(V1)=0.
FIINIT(C1)=1. ;FIINIT(PLNT)=1.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(INLET ,WEST , 1, 1, 1, 2, 1, 1, 1, 1)
COVAL(INLET ,C1 ,1. , SAME )
COVAL(INLET ,PLNT,1. , GRND )
PATCH(ABSORB ,VOLUME, 1, 11, 1, 2, 1, 1, 1, 1)
COVAL(ABSORB ,C1 ,0.3 ,0. )
COVAL(ABSORB ,PLNT, GRND ,0. )
PATCH(SORCE ,VOLUME, 1, 11, 1, 2, 1, 1, 1, 1)
COVAL(SORCE ,C1 , FIXFLU ,0.1 )
COVAL(SORCE ,PLNT, FIXFLU , GRND )
PATCH(SPIL ,CELL , 6, 6, 1, 2, 1, 1, 1, 1)
COVAL(SPIL ,C1 , FIXVAL ,1. )
COVAL(SPIL ,PLNT, FIXVAL , GRND )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 5 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(C1)=20 ;LITER(PLNT)=20
ENDIT(C1)=1.0E-03 ;ENDIT(PLNT)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(U1,LINRLX,1.)
RELAX(V1,LINRLX,1.)
RELAX(C1,FALSDT,1.0E+09)
RELAX(PLNT,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
VARMAX(PLNT)=1.0E+10 ;VARMIN(PLNT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
NAMSAT =MOSG
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
RG( 1) =0.3
RG( 2) =0.1
RG( 3) =1.
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(U1)=1. ;EX(V1)=0.
EX(C1)=0.6088 ;EX(PLNT)=0.6088
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(U1,Y,N,Y,N,N,N)
OUTPUT(V1,Y,N,Y,N,N,N)
OUTPUT(C1,Y,N,Y,Y,Y,Y)
OUTPUT(PLNT,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP