TALK=T;RUN(1,1)
DISPLAY
----------------------------------------------------------
The case concerns unsteady 2D laminar/turbulent flow
generated by rotating impeller in the cylinder with
baffles.
The main purpose of the case is to demonstrate the way to
set problem using sliding LINK option of MBFGE. User is
advised to pay attention on the use of the following PIL-
commands:
READCO(MBGR+Y)
MPATCH(1,MBS1.2,NORTH,...); MPATCH(2,MBS2.1,SOUTH,...)
NOTE!, that the stacking along Y-axis, achieved by the use
+Y in READCO, provides for XCYCLE=T treatment.
----------------------------------------------------------
ENDDIS
PHOTON USE
p ; ; ; ; ;
msg Computational Domain:
gr k 1
msg Press Any Key to Continue...
pause
cl
set vec av off
msg Velocity Vectors:
vec k 1 sh
use patgeo
msg Press Any Key to Continue...
pause
cl
msg Contours of Pressure:
con p1 k 1 fi;0.001
use patgeo
msg Press Any Key to Continue...
msg Press E to exit PHOTON ...
ENDUSE
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(MBFGE: 2D Stirred flow (K-E). )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 150
************************************************************
Group 2. Time dependence
STEADY = F
* Set overall time and no. of steps
TFIRST =0. ;TLAST =1.
FSTEP = 1 ;LSTEP = 19
TFRAC(1)=0.052632 ;TFRAC(2)=0.105263
TFRAC(3)=0.157895 ;TFRAC(4)=0.210526
TFRAC(5)=0.263158 ;TFRAC(6)=0.315789
TFRAC(7)=0.368421 ;TFRAC(8)=0.421053
TFRAC(9)=0.473684 ;TFRAC(10)=0.526316
TFRAC(11)=0.578947 ;TFRAC(12)=0.631579
TFRAC(13)=0.684211 ;TFRAC(14)=0.736842
TFRAC(15)=0.789474 ;TFRAC(16)=0.842105
TFRAC(17)=0.894737 ;TFRAC(18)=0.947368
TFRAC(19)=1.
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 18
XULAST =0.04
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 31
YVLAST =0.04
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =0.1
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NUMBLK = 2
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 19, 1, 32, 1, 2)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
* X-cyclic boundaries switched
XCYIZ( 1, T )
CCM = T
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(12)=KE
NAME(13)=EP ;NAME(141)=PRPS
NAME(142)=VC1 ;NAME(143)=UC1
NAME(144)=GEN1 ;NAME(145)=ENUT
NAME(146)=WCRT ;NAME(147)=VCRT
NAME(148)=UCRT ;NAME(149)=EPOR
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(U1,Y,Y,N,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(KE,Y,Y,N,N,N,N)
SOLUTN(EP,Y,Y,N,N,N,N)
SOLUTN(PRPS,Y,N,N,N,N,N)
SOLUTN(VC1,Y,Y,Y,N,N,Y)
SOLUTN(UC1,Y,Y,Y,N,N,Y)
SOLUTN(GEN1,Y,N,N,N,N,Y)
SOLUTN(ENUT,Y,N,N,N,N,Y)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
SOLUTN(EPOR,Y,N,N,N,N,Y)
VIST = 145
EPOR = 149 ;HPOR = 0 ;NPOR = 0 ;VPOR = 0
PRPS = 141
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,N,N,N,N,N,N)
TERMS(V1,N,N,N,N,N,N)
TERMS(KE,N,Y,Y,Y,Y,N)
TERMS(EP,N,Y,Y,Y,Y,N)
TERMS(VC1,N,Y,Y,Y,Y,Y)
TERMS(UC1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWENT = T
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1000. ;TMP1 =0. ;EL1 = GRND4
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
EL1A =0. ;EL1B =0. ;EL1C =0.
ENUL =3.183102E-06 ;ENUT = GRND3
ENUTA =0. ;ENUTB =0. ;ENUTC =0.
IENUTA = 0
PRNDTL(KE)=1. ;PRNDTL(EP)=1.
PRNDTL(VC1)=1. ;PRNDTL(UC1)=1.
PRT(KE)=1. ;PRT(EP)=1.314
PRT(VC1)=1. ;PRT(UC1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
FIINIT(V1)=1.0E-10 ;FIINIT(KE)=7.124157E-06
FIINIT(EP)=7.606068E-07 ;FIINIT(PRPS)=-1.
FIINIT(VC1)=1.0E-05 ;FIINIT(UC1)=1.0E-05
FIINIT(GEN1)=1.0E-10 ;FIINIT(ENUT)=1.0E-10
FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
FIINIT(UCRT)=1.0E-10 ;FIINIT(EPOR)=1.
PATCH(IMPEL ,INIVAL, 9, 9, 1, 12, 1, 1, 1, 1)
INIT(IMPEL ,EPOR,0. ,0. )
PATCH(BUFF ,INIVAL, 9, 9, 22, 31, 1, 1, 1, 1)
INIT(BUFF ,EPOR,0. ,0. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(MBD1 ,CELL , 1, 18, 1, 14, 1, 1, 1, 19)
PATCH(MBD2 ,CELL , 1, 18, 16, 31, 1, 1, 1, 19)
PATCH(MBS1.2 ,NORTH , 1, 18, 14, 14, 1, 1, 1, 19)
PATCH(MBS2.1 ,SOUTH , 1, 18, 16, 16, 1, 1, 1, 19)
PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 19)
COVAL(KESOURCE,KE , GRND4 , GRND4 )
COVAL(KESOURCE,EP , GRND4 , GRND4 )
PATCH(SLIDRT1 ,CELL , 1, 18, 1, 14, 1, 1, 1, 19)
PATCH(WS ,SWALL , 1, 18, 1, 1, 1, 1, 1, 19)
COVAL(WS ,KE , GRND3 , GRND3 )
COVAL(WS ,EP , GRND3 , GRND3 )
COVAL(WS ,VC1 , GRND3 ,0. )
COVAL(WS ,UC1 , GRND3 ,0. )
PATCH(WN ,NWALL , 1, 18, 31, 31, 1, 1, 1, 19)
COVAL(WN ,KE , GRND3 , GRND3 )
COVAL(WN ,EP , GRND3 , GRND3 )
COVAL(WN ,VC1 , GRND3 ,0. )
COVAL(WN ,UC1 , GRND3 ,0. )
PATCH(WIMPE ,EWALL , 9, 9, 1, 12, 1, 1, 1, 19)
COVAL(WIMPE ,KE , GRND3 , GRND3 )
COVAL(WIMPE ,EP , GRND3 , GRND3 )
COVAL(WIMPE ,VC1 , GRND3 ,0. )
COVAL(WIMPE ,UC1 , GRND3 ,0. )
PATCH(WIMPW ,WWALL , 10, 10, 1, 12, 1, 1, 1, 19)
COVAL(WIMPW ,KE , GRND3 , GRND3 )
COVAL(WIMPW ,EP , GRND3 , GRND3 )
COVAL(WIMPW ,VC1 , GRND3 ,0. )
COVAL(WIMPW ,UC1 , GRND3 ,0. )
PATCH(WBUFFE ,EWALL , 9, 9, 22, 31, 1, 1, 1, 19)
COVAL(WBUFFE ,KE , GRND3 , GRND3 )
COVAL(WBUFFE ,EP , GRND3 , GRND3 )
COVAL(WBUFFE ,VC1 , GRND3 ,0. )
COVAL(WBUFFE ,UC1 , GRND3 ,0. )
PATCH(WBUFFW ,WWALL , 10, 10, 22, 31, 1, 1, 1, 19)
COVAL(WBUFFW ,KE , GRND3 , GRND3 )
COVAL(WBUFFW ,EP , GRND3 , GRND3 )
COVAL(WBUFFW ,VC1 , GRND3 ,0. )
COVAL(WBUFFW ,UC1 , GRND3 ,0. )
XCYCLE = T
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 20 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=10
LITER(V1)=10 ;LITER(KE)=20
LITER(EP)=20 ;LITER(VC1)=20
LITER(UC1)=20
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(KE)=1.0E-03
ENDIT(EP)=1.0E-03 ;ENDIT(VC1)=1.0E-03
ENDIT(UC1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.5)
RELAX(U1,FALSDT,1.)
RELAX(V1,FALSDT,1.)
RELAX(KE,LINRLX,0.5)
RELAX(EP,LINRLX,0.5)
RELAX(PRPS,LINRLX,1.)
RELAX(VC1,FALSDT,1.0E+09)
RELAX(UC1,FALSDT,1.0E+09)
RELAX(GEN1,LINRLX,1.)
RELAX(ENUT,LINRLX,1.)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
KELIN = 1
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(VC1)=1.0E+10 ;VARMIN(VC1)=-1.0E+10
VARMAX(UC1)=1.0E+10 ;VARMIN(UC1)=-1.0E+10
VARMAX(GEN1)=1.0E+10 ;VARMIN(GEN1)=-1.0E+10
VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
VARMAX(EPOR)=1.0E+10 ;VARMIN(EPOR)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
GENK = T
PARSOL = F
CONWIZ = T
LSG3 = T
ISG62 = 1
ANGVEL =1.591551
ROTAZB =1.
CSG3 ='LCRU'
SPEDAT(SET,GXMONI,TRANSIENT,L,F)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(KE,Y,N,Y,Y,Y,Y)
OUTPUT(EP,Y,N,Y,Y,Y,Y)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(VC1,Y,N,Y,Y,Y,Y)
OUTPUT(UC1,Y,N,Y,Y,Y,Y)
OUTPUT(GEN1,Y,N,Y,N,N,N)
OUTPUT(ENUT,Y,N,Y,N,N,N)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
OUTPUT(EPOR,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 10 ;IYMON = 8 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP