TALK=T;RUN(1,1)
  AUTOPLOT USE
  file
  ghis 2

  data
  time tpar
  pl
  red
  @
   0.27492E+04 0.19541E+03 CR
  Time (sec.)@
  @
   0.17303E+03 0.24230E+04  T
  T(part.)@
  @
   0.17175E+04 0.17261E+04 CR
  Particle temperature vers time.@
  @
   0.25634E+04 0.10226E+04  P
  Press e to END
  @
  ENDUSE
  DISPLAY
  The problem describes transient particle heating in a pipe
  with constant gas temperature
  The result is compared against analytical solution:
   PART. TEMPERATURE=370.0-70.0*EXP(-TIME*0.8722375)
  ENDDIS
  
    21
  *__XP__YP__ZP__UP__VP__WP__DIAM_LIQDEN_FRATE_TEMP_(NUMB)
   0.1 0.05 0.0 0.0 0.0 1.0 0.1 1.0 1.0 300 0.0 1.e-03
  
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Particle heating in pipe : G301         )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 1
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =10.
 FSTEP = 1 ;LSTEP = 50
 TFRAC(50)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 4
 XULAST =6.2832
 XFRAC(1)=0.25 ;XFRAC(2)=0.5
 XFRAC(3)=0.75 ;XFRAC(4)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 2
 YVLAST =1.
 YFRAC(1)=0.5 ;YFRAC(2)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =50.
 ZFRAC(1)=0.1 ;ZFRAC(3)=0.3
 ZFRAC(5)=0.5 ;ZFRAC(7)=0.7
 ZFRAC(9)=0.9
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(14)=H1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,N,N,N,N,Y)
 SOLUTN(U1,Y,N,N,N,N,Y)
 SOLUTN(V1,Y,N,N,N,N,Y)
 SOLUTN(W1,Y,N,N,N,N,Y)
 SOLUTN(H1,Y,N,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=0. ;FIINIT(U1)=0.
 FIINIT(V1)=0. ;FIINIT(W1)=0.
 FIINIT(H1)=370.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(PIPEWALL,NWALL , 1, 1, 2, 2, 1, 10, 1, 50)
 COVAL(PIPEWALL,U1 ,1. ,0. )
 COVAL(PIPEWALL,W1 ,1. ,0. )
 COVAL(PIPEWALL,H1 ,1.428571 ,1. )
 
 PATCH(UNIFORM ,LOW , 1, 4, 1, 2, 1, 1, 1, 50)
 COVAL(UNIFORM ,P1 , FIXFLU ,0.1 )
 COVAL(UNIFORM ,V1 ,0. ,0. )
 COVAL(UNIFORM ,W1 ,0. ,0.1 )
 COVAL(UNIFORM ,H1 ,0. ,1. )
 
 PATCH(GXOUT ,HIGH , 1, 1, 1, 2, 10, 10, 1, 50)
 COVAL(GXOUT ,P1 , FIXVAL ,0. )
 COVAL(GXOUT ,V1 ,0. ,0. )
 COVAL(GXOUT ,W1 ,0. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 2 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,LINRLX,1.)
 RELAX(V1,LINRLX,1.)
 RELAX(W1,LINRLX,1.)
 RELAX(H1,LINRLX,0.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GENTRA,RESTART,C,NONE)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 IG( 9) = 10
 IG( 10) = 1
 IG( 11) = 20
 IG( 12) = 1
 IG( 14) = 1
 IG( 15) = 100
 IG( 16) = 5
 IG( 17) = 1
 IG( 18) = 1
 IG( 19) = 3
 IG( 20) = 21
 RG( 51) =10.
 RG( 52) =120.
 RG( 53) =4.33
 RG( 54) =52.5
 RG( 55) =50.200001
 RG( 56) =255.
 RG( 57) =18.1
 RG( 58) =5000.
 RG( 71) = GRND1
 RG( 72) =4131.799805
 RG( 74) = GRND1
 RG( 75) = GRND1
 RG( 76) = GRND1
 RG( 77) =1.
 RG( 80) =0.1
 RG( 82) =1000.
 RG( 83) =7.
 RG( 84) =1.
 RG( 86) =18.
 RG( 87) =28.9
 RG( 88) = GRND1
 RG( 89) =1.
 RG( 90) = GRND1
 RG( 91) =273.149994
 RG( 92) =273.149994
 RG( 93) =1.
 RG( 94) =3.335E+05
 RG( 95) = GRND1
 RG( 96) =0.0263
 RG( 97) = GRND1
 CG(  6) ='GHIS'
 CG(  8) ='Q1'
 CG(  9) ='NONE'
 CG( 10) ='T'
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,N,N,N)
 OUTPUT(U1,Y,N,Y,N,N,N)
 OUTPUT(V1,Y,N,Y,N,N,N)
 OUTPUT(W1,Y,N,Y,N,N,N)
 OUTPUT(H1,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 5
 NPRMON = 2 ;NPRMNT = 1 ;TSTSWP = 1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 50 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 2 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = 30 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = T
 NSAVE =CHAM
STOP