TALK=T;RUN(1,1)
  READQ1_BEGIN
  DISPLAY
  The problem is similar to library case 110; but the heat
  loss is proportional to the fourth power of the temperature.
  This is effected by the "STAR-NAME" kind of PATCH in Group 13.
  READQ1_END
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Transient Radiation From Fin            )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =20.
 FSTEP = 1 ;LSTEP = 10
 TFRAC(1)=0.1 ;TFRAC(6)=0.6
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 20
 XULAST =0.1
 XFRAC(1)=2.5E-03 ;XFRAC(3)=0.0225
 XFRAC(5)=0.0625 ;XFRAC(7)=0.1225
 XFRAC(9)=0.2025 ;XFRAC(11)=0.3025
 XFRAC(13)=0.4225 ;XFRAC(15)=0.5625
 XFRAC(17)=0.7225 ;XFRAC(19)=0.9025
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =1.0E-03
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(150)=TEMP
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(TEMP,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEMP,N,N,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.0E+04 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(TEMP)=1.25E+04
 PRT(TEMP)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(TEMP)=1.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(*TEMP ,FREEN , 1, 20, 1, 1, 1, 1, 1, 10)
 COVAL(*TEMP ,TEMP,10. ,3. )
 
 PATCH(ROOT ,WWALL , 1, 1, 1, 1, 1, 1, 1, 10)
 COVAL(ROOT ,TEMP,8.0E-05 ,1. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 10 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEMP)=20
 ENDIT(TEMP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(TEMP,LINRLX,0.5)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(TEMP)=1.0E+10 ;VARMIN(TEMP)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 USEGRD = F
 READQ1 = T
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(TEMP,Y,Y,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 5
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 5 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = 2 ;IXPRF = 1 ;IXPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 1 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(FIXEDTIM,PROFIL, 1, 20, 1, 1, 1, 1, 1, 10)
 PLOT(FIXEDTIM,TEMP,0. ,1. )
 
 PATCH(FINTIP ,PROFIL, 20, 20, 1, 1, 1, 1, 1, 10)
 PLOT(FINTIP ,TEMP,0. ,1. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP